MIL-DTL-3100H
6.2
Acquisition requirements. Acquisition documents must specify the following:
a. Title, number, and date of this specification.
b. Issue of DoDISS to be cited in the solicitation, and if required, the specific issue of
individual documents referenced (see 2.2.1 and 2.3).
c. When first article is required (see 3.1).
d. Drawing number and size of wheel assembly to be furnished (see 3.3).
e. If finish is to be other than as specified (see 3.6).
f. If marking is to be other than as specified (see 3.7).
g. If inspection conditions are other than as specified (see 4.3).
h. If first article inspection is other than as specified (see 4.4).
i. If samples are other than as specified (see 4.5.1).
j. Packaging requirements (see 5.1).
6.3 Construction identification. Construction identification (see 3.7) is a contractor
generated number or letter, or combination thereof, which completely identifies specific
processing, materials and compounds (metal preparations, bonding agents, cements, tie gums and
tire compounds), as approved by the Government, used in manufacturing submitted tires.
Construction identification will be made available to the Government.
6.3.1 Week and year of manufacture. Requirement specified herein (see 3.7) may be met
by a molded mark which consists of the 2 final digits of the number of the year enclosed by a
circle. Twelve segments, equally spaced, formed by lines radiating outward from the circle,
signify months. One punch mark, pricked each week in the segment, signifies the week of
manufacture (see figure 3).
6.4 Recovered materials. "Recovered materials" means materials that have been
collected or recovered from solid waste.
6.4.1 Solid waste. "Solid waste" means (a) any garbage, refuse, or sludge from a waste
treatment plant, water supply treatment plant, or air pollution control facility; and (b) other
discarded material, including solid, liquid, semisolid, or contained gaseous material resulting from
industrial, commercial, mining, and agricultural operations, and from community activities. It
does not include solid or dissolved material in domestic sewage, or solid or dissolved material in
irrigation returns flows or industrial discharges which are point sources subject to permits under
section 402 of the Clean Water Act, (33 U.S.C. 1342 et seq.), or source, special nuclear, or
byproduct material as defined by the Atomic Energy Act of 1954 (42 U.S.C. 2011 et seq.).
(Source: Federal Acquisition Regulations, section 23.402).
6.5 Classification deleted. Previous classifications of types I and II, styles 1 and 2 are no
longer needed. Performance requirements of this specification no longer distinguish between
types and styles (see 1.2).
13
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business